I have a hayward pump that doesn't want to stay primed on the pool suction side. It is plumbed with a jandy valve to select between spa suction and pool suction. On the pool side it is then separated again into skimmer and cleaner pipes with old metal gate valves. When I turn the jandy to spa only suction the pump primes perfectly. Once I turn it over to pool only pump won't prime..


I am guessing these gate valves are just worn out and allowing air to enter the system. One valve is actually stuck and doesn't move at all. Should I just re plumb with 1 1/2 pvc ball valve?



I have checked everything else. Lines are clear and impeller and o-rings are all good and in place.

I agree with waterbear! ball valves are inexpensive incomparison to jandy valves, but they are completely rebuildable, and in the long run you'll be more pleased. Often times you can turn the system on, get it primed off the spa, then switch your valve open and shut the system down. With a good ear you'll find your leak.

MeiYan Yi gate valve Contact MeiYan Yi

Enine gate valve Contact Enine

Saitai gate valve Contact Saitai

FengQi gate valve Contact FengQi