You are here:
News
News
gate valves minimize pressure drop 2012-05-17
Gate valves can be used in liquid or gas services to isolate the downstream line from the upstream.
knife gate valves in parallel 2012-05-16
Gate valves in parallel is usually referred to 'Knife. Single disc valves (gate) is used when not needed to achieve high integrity.
the rising stem gate valve and the non-rising stem gate valve 2012-05-15
The rising stem gate valve and the Non-rising stem gate valve
extend the life of gate valve 2012-05-14
In our experience, to extend the life of the gate valve, should be concerned with the following several points.
the flat gate valve consists of primary valve chamber 2012-05-14
The flat-gate valve compartment chamber consists of primary valve chamber, left chamber, appropriate chamber, chamber board, shaped seal ring, valve stem, valve cover and so on.
different forms of gate valves 2012-05-11
Gate valve, that is also known as knife valve or slide, is generally used to control the flow of water or almost any fluid through a tube or duct.
flat-gate valve is to utilize the actual panel style at the bottom of valve 2012-05-09
The actual opening and also shut-down of valve board would be controlled by the particular valve cover around the upper component of valve observe join using the motor institute.
