Plumbing termination points, such as on water supply lines to sinks and toilets, usually have shutoff valves. A shutoff valve allows the water supply to be discontinued to the specific plumbing applia

Forged steel gate valve body cap connection design in three forms.

Knife gate valves must be inspected before installation, and sealing surface of the cavity and other parts, does not allow dirt or sand attached.

A pressure balanced valve, required by building codes in some municipalities, provides water at nearly constant temperature to a shower or bathtub, despite pressure fluctuations in either the hot or c

Besides lubricating the moving parts of the valve, valve oil provides corrosion protection to the bare metal of the inner valve.

The gate valve, also known as a sluice valve, is a valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid.

As a standard, the valves are manufactured in Peco bolted body designs, where the joint between the body and the connector is bolted.

Exterior