You are here:
News
News
10" - 16" Manual Gate Valves "Double Seat" Trim Characte 2010-10-22
The gate valve spec. is Class 300 lbs SS body BW Sch40S Man Operated. The design conditions are T=200F and P=180 psig, in water. The Cv required is 3100.
Needle Valves vs Gate Valves 2010-10-22
Apart from the construction and manner of operation of the closure member, are there any other differences between gate valves and needle valves
Gate valve: solid or flexible wedge 2010-10-22
what are the reasons to use solid or flexible wedges in chemical service for gate valves.
Potable Water Valves 2010-10-22
Designing a potable water tank farm and I'm trying to determine whether or not the valve I want to use are acceptable.
BOV Question 2010-10-21
"The BOV/dump valve debate will rumble on throughout the worlds forums for years to come and it seems to me that no-one has the complete answer".
valve recommendation 2010-10-21
A valve used to shut off flow from a material holding tank. There is no pressure other than head pressure from the 12k gal tank. The material is a latex product.
Control valve by pass size 2010-10-21
A control valve which handles steam .the up stream pressure is 4 kg/cm2(g) and down stream pressure is .9 kg/cm2(g).The line sizes are :Upstream 20 ",Down stream 24"Control valve size : 10".
Actuator:Sluice gate 2010-10-21
We are specifying 84" x 144" sluice gates in one of our projects and we expect very high torque and thrust required for the actuator to pull up the gate under a head of 40ft water.
