Gate Valve Series
- API 600 Cast Steel Gate Valve
- API 602 Forged Steel Gate Valve
- API 603 Cast Stainless Steel Gate Valve
- AWWA Resilient Seated Gate Valve
- Knife Gate Valve
- Bellows Seal Gate Valve
- Pressure Seal Gate Valve
- Cryogenic Gate Valve
- Slab Gate Valve
- Cast Iron Gate Valve
Product drawing»
Structural drawing»
Cooperation
TechnologyMore >>
- Definition of gate valve
- Classification of gate valve
- Advantage and disadvantage of gate valve
- Drift diameter shrink of gate valve
- Standard collectton of gate valve
- Functton，structural specification，and characteristics of flat gate valve
- Compensation type double disc flat gate valve structural characteristics
- Flowrate feature analysis of flat gate valve
- Applicable working conditions and operation of gate valve
- Installation and maintain of gate valve
NewsMore >>
For water, HVAC, and general industrial lines following Japanese standards, the DN80 (3″) JIS 10K cast iron gate valve is a common choice. But do not confuse 10K with PN16 – thei... [2026-06-01]
For steam systems at 550°C, standard carbon steel (WCB) fails – its limit is 425°C. The correct materials are WC6 (1.25Cr‑0.5Mo) and WC9 (2.25Cr‑1Mo) chrome‑moly steel, which... [2026-05-27]
Titanium (TA2/Gr2) is the premier material for seawater service. Its dense oxide film gives nearly zero corrosion in marine environments, making it the top choice for offshore plat... [2026-05-25]
In LNG, ethylene, air separation, and refrigeration systems, valves must withstand -46°C or lower. Standard carbon steel (e.g., WCB) becomes brittle below -29°C, so low-temperatu... [2026-05-22]
